| Tools and Supplies - Page 2 |
|
GOVERNOR JEWELS - For Cylinder and Disc Boxes. Synthetic Rubies, these are the next hardest thing to a diamond (a hardness of 9 on a scale of 1-10)! If you're unsure of the size, you can send your jewel cap for a perfect fit (no extra charge).
- #J30 - 3.0mm - $16.00 ea.
- #J35 - 3.5mm - $18.00 ea.
- #J40 - 4.0mm - $20.00 ea.
- #J45 - 4.5mm - $22.00 ea.
- #J50 - 5.0mm - $24.00 ea.
- #J55 - 5.5mm - $26.00 ea.
- #J60 - 6.0mm - $28.00 ea.
- #J65 - 6.5mm - $30.00 ea.
Price Discounts: 6-11 pcs. = 5%; 12+ pcs. = 10% (mix or match sizes)
______________________________________________________________________
|
___________________________________________
TOOL STEEL - Oil Hardening - for making replacement comb teeth.
1/2" Wide Flat Stock:
- #TS1612 - 1/16" x 1/2" x 6" ------$5.95/pc.
- #TS5612 - 5/64" x 1/2" x 6" ------$5.95/pc.
- #TS3212 - 3/32" x 1/2" x 6" ------$5.95/pc.
- #TS7612 - 7/64" x 1/2" x 6" ------$5.95/pc.
- #TS1812 - 1/8" x 1/2" x 6" ------$5.95/pc.
- #TS5312 - 5/32" x 1/2" x 6" ------$5.95/pc.
Square Stock:
- #TS1818 - 1/8" x 1/8" x 6" ------$5.95/pc.
- #TS3636 - 3/16" x 3/16" x 6" ----$5.95/pc.
Flat Stock:
- #TS1820 - 1/8" x 2" wide x ?" -----$1.50/inch (specify # of inches)
_____________________________________________________________________
|
TIP WIRE - For replacing tooth tips in cylinder and disc boxes. Hardened, tempered steel. Use our slitting discs and Tix Solder (on the previous page) to slit and solder tooth tips.
- #TW10 - .010" thick x .035" wide x 12" long - $1.50/foot
- #TW14 - .014" thick x .033" wide x 12" long - $1.50/foot
_____________________________________________________________
|
| TAPER PINS - in brass and steel. Measured smallest tip x largest tip x length.
Stock# Type Size Price
- #TP30B Brass .030" x .065" x 1.00" $0.95/25
- #TP30S Steel .030" x .065" x 1.00" $0.95/25
- #TP40S Steel .040" x .075" x 1.00" $0.95/25
- #TP45B Brass .045" x .059" x .595" $0.95/25
- #TP45S Steel .045" x .059" x .595" $0.95/25
- #TP55B Brass .055" x .068" x .635" $0.95/25
- #TP70B Brass .070" x .100" x 1.25" $1.50/25
I have smaller taper pins on the "CYLINDER BOX SUPPLIES" page.
____________________________________________________________________________________________
|
SHOULDER SCREWS - Metric threads. Fits many of the original holes in bedplates, etc. Made to fit with our male and female Geneva Stops and Pawls (see Parts - Cyllinder Boxes).
#S45 - $4.50/10 asst. sizes
______________________________________________________________________________________________
|
CLICK SPRINGS - Spring steel...replaces the broken/cracked click springs on the winding handles pawls and governor detents.
- #CSL57 - tab on left - $6.25 each
- #CSR57 - tab on right - $6.25 each
- #CSP12 - one dozen mix/match - $72.00
______________________________________________________________________________________________
|
HOOKS - For Keywind Cases, Organettes, etc.
- #H26S - small, 1/2" long - $0.50 each
- #H26M - med., 3/4" long - $0.50 each
- #H26L - large, 1" long - $0.50 each
_______________________________________________________________________
|
RUBBER HEADED TACKS - can be used as feet for small cases, on phonographs, etc. A little over 1/2" long and 1/4" wide. Old hardware store buy-out...limited quantity on hand!
#S20 - $0.50/4
_______________________________________________________________________
|
| FELT PADS - Put under the feet of any music box (or any other object) to protect your furniture from scratches. Will not inhibit sound! Approx. 1/8" thick x 3/4" diam., brown.
#S21 - $0.50/4
_______________________________________________________________________
|
| LEATHER - Fine grain, thin black leather.
For making new tabs to lift the glass lids of cylinder boxes and some disc boxes.
Approx. 3 1/2" x 2 1/2" piece.
#S52 - $1.25/pc.
___________________________________________________
|
HINGES - Perfect for use on glass dust covers of cylinder boxes, and other small projects!
This was a hardware store buy-out...when they're gone, they're gone!
Size: Approx. 1/2" x 9/16"
#S24 - $2.50/pr.
____________________________________________________
|
ROSETTES - For under the nuts that hold down bells on disc and cylinder boxes. An exact copy of the original design. Red felt. Approx. 1/2" diam.
#S30 - $3.95/6
_______________________________________________________________________
|
OILER - Empty oiling bottle for above listed oil. Needle applicator. Won't dry out and crack!
#S53 - $3.95 each
________________________________________________________________
|
MAINSPRING GREASE - I recommend the synthetic automotive greases found in automotive and discount stores. The greases with Teflon or Lythium have worked well for me.
MUSIC BOX OIL - I recommend a heavy weight clock oil (fulcrum oil or grandfather clock oil) to use in your music boxes. It can be found at any clock supply house.
__________________________________________________________________________
|
|
